Instrument Panel Cluster (IPC) Inoperative at start-up – Built on or before 2/6/2013
Ford: 2013-2013 Focus
Some 2012-2013 Focus vehicles built on or before 2/6/2013 may exhibit an inoperative IPC on vehicle start-up
Follow the Service Procedure steps to correct the condition.
1. Connect the vehicle to a battery charger:
2. Connect Integrated Diagnostic System (IDS) and ensure the USB connection is secure.
a. Any Interruption during the reprogramming event will result in being forced to repeat procedure.
3. Is the vehicle currently exhibiting an inoperative IPC?
a Yes – restore IPC to normal operation by removing fuse number 69 from the body control module for one (1) minute and then reinstall fuse. Refer to Wiring Diagram, Section 11-1, page 3.
b. No -Proceed to Step 4.
4. Reprogram the IPC to the latest calibration using IDS release 85.02 and higher. Calibration files may also be obtained at www.motorcraft.com
Eligible Under Provisions of NEw Vehicle Limited Warranty Coverage And Emissions Warranty COverage
IMPORTANT: Warranty/ESP coverage limits/policies/prior to approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
|130627A||2012-2013 Focus: Restore IPC Operation if Necessary and reprogram the IPC (Do Not Use With Any Other Labor Operations)||.4 Hrs|
|Basic Part No.||Condition COde:|